90 F2B ENGINE T RAKKER E URO 4/5 PRINT603.93. 641 - Fit Base q November 2006 Print 603.93.641 Figure 167 45268 Angle closing by means of tool 99395216 (1): 3rd phase: 90 angle 4th phase: 75 angle Figure 168 47597 the oil pump (4), intermediate gears (2) with rod (1) and hten screws (3) in two phases: eliminary tightening 30 Nm gle closing 90 Figure 169 47592 pply sealant LOCTITE 5970 IVECO No. 2995644 to the ear housing using the proper equipment (1). he sealer string (1) diameter is to be 1,5 0.5 0.2 Tighten the screws shown in the figure by means of a torque wrench, in compliance with the following order and tightening torque:
Figure 170 Engines without power take-off 47598 no. 13 screws M12 x 1.75 x 80 tightening torque 63 Nm : no. 3 screws M10 x 1.5 x 35 tightening torque 42 Nm no. 1 screw M10 x 1.5 x 100 tightening torque 42 Nm no. 1 screw M10 x 1.5 x 180 tightening torque 42 Nm no. 2 screws M18 x 1.25 x 125 tightening torque 24 Nm Figure 171 84390 Engines with power take-off no. 10 screws M12 x 1.75 x 80 tightening torque 63 Nm ¬ no. 3 screws M10 x 1.5 x 35 tightening torque 42 Nm no. 1 screw M10 x 1.5 x 170 tightening torque 42 Nm no. 1 screw M10 x 1.5 x 180 tightening torque 42 Nm no.2 screws M12x 1.75 x 125 tightening torque 63 Nm d no. 8 screw M10 x 1,5 x 120 no.
2 screw M10 x 1,5 x 120 (apply to the thread LOCTITE 275) OTE Install the gear housing within 10 of the application of the sealant.