210 F3B ENGINE T RAKKER E URO 4/5 ENGINE ASSEMBLY Base q November 2006 Print 603.93.641 ing the brackets 99361036, secure the crankcase to the nd 99322230. unt the cylinder liners as described on page 179. Figure 167 47586 ount the oil nozzles (2), making the grub screw coincide th the hole (3) in the crankcase. range the bearing shells (1) on the main bearing housings. OTE Not finding it necessary to replace the main bearings, you need to fit them back in exactly the same sequence and position as in removal. Choose main bearings, if they are to be replaced, based on selection described in chapter kSelecting main and big end bearingsy.
Figure 168 47570 bricate the bearing shells then mount the crankshaft (2) ng the tackle and hook 99360500 (1). Figure 169 49021 Arrange the bearing shells (1) on the main bearing housings in the crankcase base (2). Figure 170 47595 Apply LOCTITE 5970 IVECO No. 2995644 silicone on the crankcase using the appropriate tools (1) as shown in Figure 171.