DTC FMI Failing component Type of Failure Visible failure Possible Cause Repair action Checks to be performed Measuring conditions Values to be detected Remarks 113 ACCELER- ATOR PEDAL/ BRAKE PEDAL SUSPECT Vehicle acceler- ation very slow. Engine idle speed: 500 rpm. Accelerator pedal and brake pressed simulta- neously (for too long); Accelerator pedal blocked or faulty; Incorrect use of vehicle. Check the accelerator pedal signal and pedal mechanical movement. 116 CLUTCH SIGNAL SUSPECT The parameter reading shows that the clutch is pressed. Clutch switch faulty or wiring problems in pedal. Check clutch pedal switch and wiring.
117 BRAKE PEDAL SIGNAL ERROR Slight power re- duction Main and sec- ondary brake switch not syn- chronised. One of the two brake pedal switches may be stuck. Check the synchronisa- tion of both switches (signal) and wiring. 119 PLAUSIBIL- ITY +15 Possible mech- anical problem (in pawl) or elec- trical problem. Check wiring. 121 SPEED LI- MITER W/ LIGHT Warning light per- manently off. Short circuit or defective wiring. Check wiring. 122 WARN- ING LIGHT EOBD Warning light per- manently off. Short circuit or defective wiring. Check wiring.