Iveco — Руководство по ремонту Iveco Trakker Euro 4/5 (EN)

Failing Type of Checks to be Measuring Values to be DTC FMI Visible failure Possible Cause Repair action Remarks component Failure performed conditions detected 149 PRE-HEAT- Filter heater not Wiring or filter Check the wiring. Re- ING RELAY working. heater short-cir- place the filter heater if FUEL cuited. necessary. FILTER 151 INJECTOR The engine runs Injector no.1 Check correct tightness CYLINDER on 5 cylinders. electric trouble. to torque of the con- 1 nectors on the solenoid valve of the injector (1.36 - 1.92 Nm). Check the integrity of the injec- tor coil and replace the injector if defective. If the coil is integral, check the wiring between the sole- noid valve and EDC con- nector.

152 INJECTOR The engine runs Injector no.2 Check correct tightness CYLINDER on 5 cylinders. electric trouble. to torque of the con- 2 nectors on thesolenoid valve of the injector (1.36 -1.92 Nm).Check the integrity of the in- jector coil and replace the injector if defective. If the coil is integral, check the wiring be- tween the solenoid valve and EDC con- nector. 153 INJECTOR The engine runs Injector no.3 Check correct tightness CYLINDER on 5 cylinders. electric trouble to torque of the con- 3 nectors on the solenoid valve of the injector (1.36 - 1.92 Nm). Check the integrity of the injec- tor coil and replace the injector ifdefective.

If the coil is integral, check the wiring between thesole- noid valve andEDCcon- nector. DTC FMI Failing component Type of Failure Visible failure Possible Cause Repair action Checks to be performed Measuring conditions Values to be detected Remarks 149 PRE-HEAT- ING RELAY FUEL FILTER Filter heater not working. Wiring or filter heater short-cir- cuited. Check the wiring. Re- place the filter heater if necessary. 151 INJECTOR CYLINDER 1 The engine runs on 5 cylinders. Injector no.1 electric trouble. Check correct tightness to torque of the con- nectors on the solenoid valve of the injector (1.36 - 1.92 Nm). Check the integrity of the injec- tor coil and replace the injector if defective.

If the coil is integral, check the wiring between the sole- noid valve and EDC con- nector. 152 INJECTOR CYLINDER 2 The engine runs on 5 cylinders. Injector no.2 electric trouble. Check correct tightness to torque of the con- nectors on thesolenoid valve of the injector (1.36 -1.92 Nm).Check the integrity of the in- jector coil and replace the injector if defective. If the coil is integral, check the wiring be- tween the solenoid valve and EDC con- nector. 153 INJECTOR CYLINDER 3 The engine runs on 5 cylinders. Injector no.3 electric trouble Check correct tightness to torque of the con- nectors on the solenoid valve of the injector (1.36 - 1.92 Nm).

Check the integrity of the injec- tor coil and replace the injector ifdefective. If the coil is integral, check the wiring between thesole- noid valve andEDCcon- nector.