Iveco — Руководство по ремонту Iveco Trakker Euro 4/5 (EN)

Failing Type of Checks to be Measuring Values to be DTC FMI Visible failure Possible Cause Repair action Remarks component Failure performed conditions detected 2FF ERROR Slight power re- Oil over-diluted. Change the engine oil. CHECK OF duction CRITICAL TIME FOR OIL DILU- TION 392 TURBINE Poor perform- Connection Check VGT connection ACTUA- ance damaged. and actuator. TOR Battery voltage CON- excessive (ECU TROL overheating). ELECTRO- VALVE 3AF SERIOUS No effect per- Problems in Ad- Check the faults in the EOBD ceived by the Blue dosing sys- Denoxtronic and con- FAULT driver. tem. sult the control unit FROM DE- troubleshooting guide.

NOX- TRONIC (EOBD FLASHING LIGHT) 3C8 TIMEOUT No effect per- CAN messages Check the TCU con- OF CAN ceived by the from TCU nection with the CAN MESSAGE driver. (Transmission line. TSC1-VE Control Unit) in- PASSIVE consistent. 3C9 ERROR No effect per- CAN configur- Check CAN line wiring. MESSAGE ceived by the ation incorrect. Check BC wiring and CAN driver. CAN connec- operation. HRDV tions defective. Terminal resis- tance not suit- able. 3D3 ECU No effect per- Poor control Reprogram the central OVERRUN ceived by the unit program- unit. If the error is re- MONI- driver. ming/flash peated, replace the TORING Possible internal central unit, if needed. ERROR fault.

DTC FMI Failing component Type of Failure Visible failure Possible Cause Repair action Checks to be performed Measuring conditions Values to be detected Remarks 2FF ERROR CHECK OF CRITICAL TIME FOR OIL DILU- TION Slight power re- duction Oil over-diluted. Change the engine oil. 392 TURBINE ACTUA- TOR CON- TROL ELECTRO- VALVE Poor perform- ance Connection damaged. Battery voltage excessive (ECU overheating). Check VGT connection and actuator. 3AF SERIOUS EOBD FAULT FROM DE- NOX- TRONIC (EOBD FLASHING LIGHT) No effect per- ceived by the driver. Problems in Ad- Blue dosing sys- tem. Check the faults in the Denoxtronic and con- sult the control unit troubleshooting guide.

3C8 TIMEOUT OF CAN MESSAGE TSC1-VE PASSIVE No effect per- ceived by the driver. CAN messages from TCU (Transmission Control Unit) in- consistent. Check the TCU con- nection with the CAN line. 3C9 ERROR MESSAGE CAN HRDV No effect per- ceived by the driver. CAN configur- ation incorrect. CAN connec- tions defective. Terminal resis- tance not suit- able. Check CAN line wiring. Check BC wiring and operation. 3D3 ECU OVERRUN MONI- TORING ERROR No effect per- ceived by the driver. Poor control unit program- ming/flash Possible internal fault. Reprogram the central unit. If the error is re- peated, replace the central unit, if needed.