8 GEARBOX ZF 9 S 1310 T.O T RAKKER E URO 4/5 DIAGRAM OF MODULE E 13 MP Figure 4 112209 1. GRE pneumatic switch - 2. Valve enabling GRE engagement -3. Lane lock - 4. Pressure switch - 5. VCM control unit - 6. Lane locking solenoid valve - 7. GRE switching valve -8. GRE cylinder - 9. Switching solenoid valve This operation is to be carried out only where the bearing is to replace. NOTE Lock speed range switching - Prevents switching from high to low speed when a certain number of revs is exceeded. - Protects the synchronisers from excessively high peripheral speeds. - Protects the clutch and engine from over-revving. EXAMPLE:
If you are in 5th gear and the rev speed is > 1000 rpm it will NOT be possible to drop to 4th gear. Lane lock - Prevents incorrect engagement of 4 th 1 st instead of 4 th 5 th The driver intends to pass from 4th to 5th gear by switching the GP lever to high, but has forgotten to select GP - High on the selector: the lane lock function is activated to prevent selection of lane Ѕ. This operation is to be carried out only where the bearing is to replace. NOTE - Prevents incorrect engagement of 8 th 5 th The lane lock function prevents incorrect engagement of 8 th 5 th at a running speed of above 2000 rpm. Base - November 2006 Print 603.93.641