Iveco — Руководство по ремонту Iveco Trakker Euro 4/5 (EN)

16/6 T RAKKER E URO 4/5 GEARBOXESZF 16 S 1620 T.D. - 2220 T.D. - 2520 T.O. Print603. 93.331 PNEUMATIC CONTROL OF GEARBOX  Figure 2/6 DIAGRAM OF PNEUMATIC CONTROL OF GEARBOX WITH SERVOSHIFT 1. Splitter control selector - 2. Inhibitor valve - 3. Services reservoir - 4. Servo-clutch - 5. Double control valve - 6. ERG driving 119423 cylinder - 7. Switch signalling gearbox in neutral - 8. Reverse gear switch - 9. Control valve - 10. Distributor - 11. Servoshift - 12. Piping - 13. Piping The splitter (slow speeds - fast speeds) and epicyclic reduction gear unit are air operated and controlled with the speed control lever.

Through the piping (12), the distributor (10) supplies the servo-clutch (4) that, if operated with the clutch pedal, supplies the servoshift (11) through the piping (13). The selector (1) pre-selects the L range (slow) and V range (fast) via the double control valve (5). They are inserted via the inhibitor valve (2) when the clutch pedal is pressed. A switch (8) on the gearbox control turns on the reversing light when reverse gear is engaged. The switch (7) signalling when the gearbox is in neutral is on the cover of the gear control. The epicyclic unit engages and disengages automatically when passing from the 1st H to the 2nd H and vice versa.

When the gearbox is in neutral, the driving cylinder (6) is operated by the pressurized air via the control valve (9). Another switch on the ERG driving cylinder (6) turns on the indicator light in the cab (with the symbol of the tortoise) when the epicyclic reduction gear is engaged. Print 603.93.641/A Revi - June 2007