48 F2B ENGINE T RAKKER E URO 4/5 Base - November 2006 Print 603.93.641 Figure 24 Cut the belt (1), as it must not be us Figure 25 Using an appropriate tool (2), operate arrow, and remove the belt (1) dri alternator and fan. Take out the screws and remove coupling (3). 112330 ed again. 73579 in the direction of the ving the water pump, the el ectromagnetic Figure 26 87202 Remove the following components: - alternator (1); - belt tightener support (2); - if present, air conditioner compressor (3); - water pump (5) and pipe; - fixed backstand (4). Only models equipped without Intarder - thermostat unit (6).
Figure 27 87203 Only models equipped with Intarder Loosen straps (2 and 4), then remove pipe (1) from the cylinder head and pipe (3). Remove the fastening screws, then take off thermostat unit (5).