56 F2B ENGINE T RAKKER E URO 4/5 540420 Replacing cylinder liners 77812 protrusion with tool 99360334 (1) to 170 Nm. 99395603 (5) placed on base 99370415 (6). protrusion compared to the replace the adjusting ring (1, having different thickness. PROTRUSION 49017 35012 (3). Base q November 2006 Print 603.93.641 moval Figure 61 47577 ce details 99360706 (1 and 2) and plate 99360724 (4) as own in the figure, by making sure that the plate (4) is operly placed on the cylinder liners. hten the screw nut (1) and remove the cylinder liner (3) m the block. tting and checking protrusion Figure 62 16798 lways replace water sealing rings (3, 4 and 5).
stall the adjustment ring (1) on the cylinder liner (2); bricate lower part of liner and install it in the cylinder unit ing the proper tool. Figure 63 Check cylinder barrel pr (1-2-3-4) and tighten screw With dial gauge 99395603 ( Measure the cylinder barr cylinder head supporting pla (Figure 64); otherwise re Figure 62) fitted with spare Figure 64 CYLINDER LIN Figure 65 (Demo When the installation is com (1) to the block (2) with stu OTE The adjustment ring (1) is supplied as spare parts in the following thicknesses: 0.08 mm - 0.10 mm - 0.12 mm.