F2B ENGINE 63 T RAKKER E URO 4/5 Selection of main half-bearings (rectified pins) If the journals have been rectified, the procedure described cannot be applied. In this case, make sure that the new diameter of the journals is as specified on the table and install the only half-bearing type required for this undersizing.
Figure 76 -0.127 red/black = mm 3.063 to 3.073 green/black = mm 3.073 to 3.084 1 2 3 82.784 82.793 green/black green/black green/black 1 green/black green/black green/black 82.794 82.803 2 red/black green/black green /black red/black green/black green/black 82.804 82.814 3 red/black red/black red/black red/black red/black red/black -0.254 red = mm 3.127 to 3.137 1 2 3 82,666 82,686 red red red red red red -0.508 red = mm 3.254 to 3.264 1 2 3 82.412 82.432 red red red red red red Print 603.93.641 Base q November 2006