Ethernet Communication Module IFD9506 Warning 3 Please read this instruction carefully before use and follow this instruction to operate the device in order to prevent damages on the device or injuries to staff. 3 Switch off the power before wiring. 3 IFD9506 is an OPEN TYPE device and therefore should be installed in an enclosure free of airborne dust, humidity, electric shock and vibration. The enclosure should prevent non-maintenance staff from operating the device (e.g. key or specific tools are required for operating the enclosure) in case danger and damage on the device may occur. 3 IFD9506 is to be used for controlling the operating machine and equipment.
In order not to damage it, only qualified professional staff familiar with the structure and operation of IFD9506 can install, operate, wire and maintain it. 3 DO NOT connect input AC power supply to any of the I/O terminals; otherwise serious damage may occur. Check all the wirings again before switching on the power and DO NOT touch any terminal when the power is switched on. Make sure the ground terminal is correctly grounded in order to prevent electromagnetic interference.
Table of Contents 1 INTRODUCTION...................................................................................................................................3 1.1 Features ......................................................................................................................................3 2 PRODUCT PROFILE & OUTLINE .......................................................................................................4 1.2 Specifications ..............................................................................................................................3 2.1 Dimension ...................................................................................................................................4 2.2 Product Profiles...........................................................................................................................5 2.3 LED Indicators.............................................................................................................................5 2.4 RJ-11 PIN Definition....................................................................................................................5 2.5 RJ-11 PIN Definition....................................................................................................................5 2.6 RJ-45 PIN Definition....................................................................................................................6 2.7 RS-232 PIN Definition .................................................................................................................6 2.8 Address Switch ...........................................................................................................................6 2.9 Data Format ................................................................................................................................6 2.10 Baud Rate for Modbus Communication ......................................................................................6 2.11 Feed-through Terminal PIN Definition .........................................................................................7 3 INSTALLATION & WIRING ..................................................................................................................7 3.1 How to Install...............................................................................................................................7 3.2 How to Connect IFD9506 to Network..........................................................................................7 4 REGISTERS IN IFD9506......................................................................................................................8 4.1 Basic Registers (BR)...................................................................................................................8 4.2 Explanations on BR.....................................................................................................................9 4.3 Alarm Registers (AL).................................................................................................................12 DVP-PLC Application Manual 1