Ethernet Communication Module IFD9506 10.5 Monitoring Mode 1. See 8.1 for how to set up communication. 2. Open IFD9506 Configuration page and switch to “Monitor” page. 3. The settings: DVP-PLC Application Manual 43 Application Writing the address of the device to be monitored into the monitor table. Steps (1) Use monitor bit and monitor word functions. (2) Monitor bit data in station address 1, H100 and H300, and word data in station address 1 H150. (3) Monitor bit data in station address 2, H200. (4) Monitor word data in station address 3, H200. (5) Monitor wird data in station address 4, H100. (6) Monitor bit quantity: 3; monitor word quantity: 3