Ethernet Communication Module IFD9506 Press it to complete the setup. Step 5: “Compile” first and “Download Screen and Recipe” to complete the setups in the HMI. Compile Download Screen and Recipe 10.7 Application of Virtual COM Port 1. Setting up Virtual COM Port „ For the COM setting, select “User Define” and set the communication parameters to the ones consistent with those in VFD-E. DVP-PLC Application Manual 47 Application Through the virtual COM port, IFD9506 is able to transmit the data sent to RS-232 to the Ethernet by connencting to the software supporing serial ports, e.g. Delta’s WPLSoft, VFDSoft and ASDA-Soft.
See the example below for how to connect IFD9506 to VFD-E AC motor drive through the virtual COM port by VFDSoft. Steps (1) Select “User Define” protocol and set the parameters in the serial master and serial slave to the ones consistent with those in VFD-E. (2) Open Delta VFDSoft, set up the communication format (COM Setup) and establish the connection.