EnviroRanger ERS 500 (Wallmount), Milltronics BW500, Milltronics BW500/L, Milltronics SF500, MultiRanger 100/200, HydroRanger 200 bus ground (GND) A-line B-line bus cable shield bus +5V (Vcc) RTS Note: • To daisy-chain devices with the BW500, BW500/L or SF500, connect both wires to the existing A-line and B-line terminals. • RTS is used in some equipment to determine the direction of transmission. In normal applications only A-line, B-line, and shield, are used. EnviroRanger ERS 500 (Rack or Panel Mount) When using a SmartLinx card with the EnviroRanger (rack or panel mount) all wiring is made to the EnviroRanger terminal board.
The PROFIBUS connections map to the EnviroRanger terminal board as shown: Installation 1. RTS is used in some equipment to determine the direction of transmission. In normal applications only A-line, B-line, and shield, are used. 7ML19981AQ03 SmartLinx PROFIBUS DP – INSTRUCTION MANUAL Page 9 EnviroRanger Connection 65 Gnd bus _ 66 RTS1 68 A 69 B 71 V bus +5V _ 67 bus cable shield