Communications Setup 1. For firmware V 3.05, the default is 0. For all higher ersions, the default is 1.
Page 16 SmartLinx PROFIBUS DP – INSTRUCTION MANUAL 7ML19981AQ03 AiRanger / SITRANS LU, EnviroRanger, MultiRanger BW500, BW500/L, SF500 P762 Index Name of area Default value Range Name of area Default value Range SF500 , BW500 BW500/L 1 Instrument 0 = No 1 status 1 = Yes Instrument 0 = No 1 1 status 1 = Yes 2 Reading 10 0 = No 1…10 = include that number of items Rate 1 1 0 = No 1 = Yes 3 0 = No 1…10 = Alarm 10 include that number of items 0 = No Load 1 1 1 = Yes 4 Point-on- priority 1 0 = No 1 = Yes Speed 1 1 0 = No 1 = Yes 5 0 = No MPA 1 1 = Yes 0 = No Total 1 1 1 = Yes 6 SPA 1 0 = No 1 = Yes Relay Status 1 1 0 = No 1 = Yes 7 Operating 0 = No 1 Mode 1 = Yes 0 = No DI Status 1 1 1 = Yes 8 SPA 1 1 0 = No 1 = Yes 9 Command 0 = No 1 1 Control 1 = Yes 10 MultiSpan 1 0 0 = No 1 = Yes 11 0 = No PID 1 0 1 = Yes 12 Batch 1 0 0 = No 1 = Yes 13 Batch 0 = No 1 0 Prewarn 1 = Yes 14 Word Order 1 1 0 = No 1 = Yes 15 0 = No Status 2 11 1 1 = Yes 16 Batch Total 11 0 0 = No 1 = Yes