EXTERIOR hp Color 9850mfp 1.5 Removing and reinstalling the main board unit A. Procedure 1. Remove the RADF. (See " DISASSEMBLY / 2. Remove the filter cover. (See " 1.1 Replacing the ASSEMBLY of the RADF .") filter 1 and the dust filter 2 .") [7] [5] [4] [6] [5] [4] [3] 3. Loosen 2 screws [1], remove 13 screws [2], and 4. then remove the rear cover [3]. Remove the side cover 2. (See " 1.2 Replacing the dust filter 1 and the ozone filter 1 ."). 5. Remove the screws [5], one for each, and [3] 6. thenremove the 2 original cover supports [6].Remove 2 caps [4]. [1] 7. Remove 4 screws [7] and then remove the scanner cover R [8]. [1] III DIS./ASSEMBLY '[1] [2] 8. Remove the special screw [1]. 9.
Remove 4 screws [2] and then remove the [1] [3] board seal plate 2 [3]. [2] 3-8