hp Color 9850mfp SCANNER 2.2 Removing and reinstalling the scanner glass A. Procedure 1. Remove 3 screws [1] and then remove the origi- nal positioning plate R [2]. [5] [1] [6] [4] [2] 2. Remove 2 screws [3] and then remove the origi- nal positioning plate L [4]. 3. Remove 2 screws [5] and the remove the scan- ner cover M [6]. 4. 5. Reinstall the above parts following the removal Remove the scanner glass [7]. steps in reverse. Note: • Be sure to reinstall the scanner glass with its white reference plate [8] up. • [4] from the glass.
These two pieces are glued together to prevent dust on the white Do not separate the original positioning plate [7] [3] [8] III DIS./ASSEMBLY reference and prevent originals going into the gap between the original positioning plate and the glass. 3-13