SAFETY AND IMPORTANT WARNING ITEMS DANGER : HANDLING OF SERVICE MATERIALS • Unplug the power cord from the wall outlet. Drum cleaner (isopropyl alcohol) and roller cleaner (acetone-based) are highly flammable and must be handled with care. A risk of fire exists. • Do not replace the cover or turn the MFP ON before any solvent remnants on the cleaned parts have fully evaporated. A risk of fire exists. • Use only a small amount of cleaner at a time and take care not to spill any liquid. If this happens, immediately wipe it off. A risk of fire exists. • When using any solvent, ventilate the room well. Breathing large quantities of organic solvents can lead to discomfort. 3.
MEASURES TO TAKE IN CASE OF AN ACCIDENT • If an accident has occurred, the distributor who has been notified first must immediately take emergency measures toprovide relief to affected persons and to prevent further damage. • If a report of a serious accident has been received from a customer, an on-site evaluation must be carried • out quicklyand hp must be notified. To determine the cause of the accident, conditions and materials must be recorded through direct on-site checks, inaccordance with instructions issued by hp. • For reports and measures concerning serious accidents, follow the regulations given in “Serious Accident Report/Follow-up Procedures”. 4.
CONCLUSION • Therefore,safety can be maintained by the appropriate daily service work conducted by the customer Safety of users and customer engineers depends highly on accurate maintenance and administration. engineer. When performing service, each MFP on the site must be tested for safety. The customer engineer must • verify thesafety of parts and ensure appropriate management of the equipment. S-9