WRITING hp Color 9850mfp 3.2 the write unit Removing and reinstalling Warning: • Be sure that the write unit should not be powered with it slid from its normal instal- lation position. • Be sure not to remove the write unit cover while being supplied with power. Otherwise, laser beams may get into your eyes and you may lose your sight. Note: • Bu sure not to remove the write unit cover. Do not loosen the screws, either. • When removing the write unit, be careful not to touch the dust-proof glass (to prevent the III DIS./ASSEMBLY • Be sure not to remove the write unit for at mirror from being stained). least two minutes after the main power switch is turned off.
• When replacing the side cover 1, insert the prong [1] on the side cover 1 into the notch on the engine. [1] A. Procedure 1. Open the by-pass tray [1]. 2. Loosen 4 screws [2] and remove the side cover [4] [2] [5] 3. Loosen 5 screws [4] and remove the side cover 2 [3]. 1 [5]. [3] [1] 3-26