hp Color 9850mfp FIXING 2. Remove a screw [1] and then remove the fixing temperature sensor 2 [2]. Note: • Be careful not to change the position of the set screw of the fixing temperature sensor 2. • Be careful not to damage the internal surface of the sensor. • A positioning jig is not used when reinstalling it. 3. Reinstall the above parts following the removal [2] [1] steps in reverse. D. 1. Remove 2 faston terminals [1] and 2 screws [2] Procedure (for removing the thermostat L) of the thermostat L and then remove the ther- mostat section. III DIS./ASSEMBLY [1] [2] 3-95