EXTERIOR Q3228A B. Fixing the fixture at 90 degrees Note: • When removing RADF or when opening RADF to remove the scanner components, the fix- ture should be fixed at an degree of 90°. If not, the RADF installing metal plate may be deformed. 1. Fix the hinge opening/closing angle adjusting fixture at an angle of 90° by either one of the fol- lowing methods. Two types of fixtures, 70° and 40-degree use, are installed. They can be dis- tinguished by the mark on them. 70-degree hinge opening/closing angle adjust- ing fixture: As shown in the drawing right, untighten 4 screws [1], slide down 2 adjusting fixtures [2] and retighten 4 screws [2] positively.
III DIS./ASSEMBLY 40-degree hinge opening/closing angle adjust- ing fixture: Untighten 4 screws [1], install 2 adjusting fixtures [2] changing their upper and lower positions and retighten 4 screws [2] posi- [2] [1] [1] 2. After completion of required process, return tively. them to the original positions. [2] 3-2