Q5686A/Q5687A CONVEYANCE (3) For the third and succeeding copies A specified period of time after the finisher entrance sensor (PS704) detects the trailing edge of the last paper of the second copy, the by-pass gate solenoid (SD705) turns on to pull in the first paper of the third copy to the by-pass side. It turns off a specified period of time after PS704 detects the trailing edge of the first paper of the third copy. SD705 does not operate while in the conveyance of the second and succeeding sheets of paper.
II UNIT EXPLANATION [1] First copy [4] The first paper of the second copy being pulled into the by-pass [3] Third copy [2] Second copy [5] Trailing edge of the last paper of the second copy 1.2.4 Shift control The shift roller is driven by the finisher conveyance motor (M701) to convey paper to the main tray. A. Shift operation When the shift motor (M702) [2] rotates while in the paper conveyance to the main tray [1], the crank mechanism [3] shifts the entire shift moving section [5] including the shift roller [4] about 30 mm to the rear side to shift and move paper for exit. The shift position is detected by the shift HP sensor (PS718) [7].
[7] [2] [4] [5] [1] [3] [3] [2] [5] [4] [6] [7] 2-5 [1] [2] [3] Finisher entrance sensor (PS704) Finisher conveyance drive motor (M701) By-pass gate solenoid (SD705) Stapler drive motor (M711) [4] [5]