Q5690A PAPER FEED 5. Remove 2 stop rings [1]. 6. With the "D" cuts [2] of the shaft and the fixture attached together, remove the double feed pre- vention roller [3]. [1] [3] [2] [1] 7. Remove the double feed prevention roller rub- ber [2] from the shaft [1] and replace it with a [3] 8. Reinstall the above parts following the removal new one. III DIS./ASSEMBLY steps in reverse. [1] Note: • Be sure to install the double feed prevention roller rubber [2] so that the paint mark [3] turns in the arrow-marked direction. • Be sure to check to see if the PET sheet for the drive gear cover is not damaged. • Be sure to check that the double feed preven- tion roller is not smeared with grease. [2] 3-9