Q5690A TRAY UP/DOWN 3. TRAY UP/DOWN 3.1 Removing and reinstalling the rear drive A. Removing the cover Note: • Be sure to lower the up/down plate to its lower most position in advance by pressing the tray down switch (SW100) with electricity sup- plied. 1. Remove the HCI from the engine. 2. Remove the right side cover and the front cover. 3. Remove the clutch replacement cover and the rear cover. B. Removing the paper feed drive 1. Remove 9 connectors [1] provided on the rear III DIS./ASSEMBLY left side. [1] [1] [1] 2. Remove the paper feed clutch (MC101) and the pre-registration clutch (MC102) [1]. See ("2.5 [1] [2] Replacing the paper feed clutch and the pre- registration clutch"). 3.
Remove an E-ring [2]. 3-11