Feeding process Post insertion overview Automatic sheet feeding (online operation) Manual sheet feeding (offline operation) Tray up/down motors/U/L (M201/M202) raise the Up/down plate/U/L. M201/M202 (tray up/down/U/L) raises the Up/down plate/L. When sheet feed SD/U/L (SD201/SD202) and conveyance MC/U/L (MC201/MC202) come on, the drive of PI conveyance motor (M203) is transmitted and the sheets are fed, one by one, by pick, feed, and separation rollers.
When sheet feed SD/U/L (SD201/SD202) and conveyance MC/U/L (MC201/MC202) come on, the drive of PI conveyance motor (M203) is transmitted and all sheets set on the lower tray are fed into the finisher stacker by pick, feed, and separation rollers. finisher carries out finishing processes. For the fed sheet, a loop is formed at the conveyance rollers /U/L to correct the bend temporarily, and then the sheet is conveyed. In this case, a loop is formed at the conveyance roller /L for the sheet, the bend is corrected temporarily, and then the sheet is conveyed. Sheets are stacked in the finisher as cover sheets for papers conveyed from the MFP, and then applied with finishing processes.
ENWW Feeding process 5