Replacing the double feed prevent roller and torque limiter CAUTION Make sure that the power cord of the MFP is unplugged from the power outlet. Procedure 1 When replacing the double feed prevent roller and the torque limiter for the upper tray, detach the top cover. 5 When replacing the separation roller and the torque limiter for the lower tray, open the upper unit and perform the steps 2 and 3. 2 Detach the paper pick roller unit. 3 Release the hooks on both sides, remove the separation roller assembly by lifting up, then pull out the shaft, and remove the double-feed-prevention roller together with the feed-reverse gear. 6 Reinstall the above parts following the removal steps in reverse.
CAUTION Ensure that the mounting direction of each roller and rubber is correct. 4 Separate the separation roller and the torque limiter from the separation roller assembly. 20 Post insertion disassembly/assembly ENWW