7 Firmly pull the fuser up by the blue tabs on both ends, and then pull the fuser out. 8 Use the blue tabs on the new fuser to slide it into the printer along the guides. On the left side of the fuser, rotate the blue gear up two or three times until the fuser drops into place. snap into place. 11 If an optional duplexer was removed from the printer, slide the duplexer back into the printer until it clicks into place. 12 Close the lower left door. 13 If an optional multi-bin mailbox is attached to the printer, push the mailbox back toward the printer. 130 Chapter 4 - Printer maintenance EN 7 8 CAUTION Use only the blue tabs to push the fuser into the printer.
9 On the right side of the fuser, push the green lever down. 10 Rotate the blue levers up until they 9 10