HP — Front covers and panels

Removing the inside left panel 1 Remove the front cover (see page 228). 2 Remove the top cover assembly (see page 232). 3 Remove eight screws on the inside panel (callout 1). 2 2 21 3 2 4 2 21 Figure 81. Inside left panel 4 Remove the waste toner tray cover (callout 2) by releasing the tab on the right side of the cover with a small screwdriver. 5 Remove the waste toner tray. 6 Open the left lower door to disengage the interlock. 7 Swing both the lower green lever (callout 3) and the upper blue lever (callout 4) to the right. 8 Pull the panel off. Notes about reinstalling:

 When replacing the inside left panel, the lower left door and the toner carousel door must be open so that the interlock engages. 230 Chapter 6 - Removal and replacement EN