Left assemblies Gain access to the following assemblies from the left side of the printer: formatter board internal printer hard disk feeder assembly face-up solenoid face-up exit assembly Multi-bin mailbox/3,000-sheet stapler/stacker/ 3,000-sheet stacker Remove the paper output accessory before beginning repairs on the left side of the printer. 1 Turn the printer off and unplug the power cable. 2 Unplug the paper output accessory power cable from the printer. 3 Unplug the paper output accessory interface cable from the printer. 4 Holding the paper output accessory by the handle on the top and by the main body towards the bottom, pull the accessory away from the printer.
5 Push down on the end of the guide rail until it releases from the bracket on the 2,000-sheet input unit. 6 Raise the guide rail. EN Left assemblies 253