HP 3,000-sheet stapler/stacker error messages Table 52. Operating errors in the stapler/stacker Operating errors 494 Chapter 7 - Troubleshooting EN Control panel messages Event log error message User LED Service LED Description Recommended action Output bin full Clear paper from face up N/A Blinking amber (print job or mopy in progress) N/A Face up bin is full; 125 sheets have been collected in the face-up bin. Remove paper from the face-up bin. Output bin full Clear paper from optional bin 1 N/A Blinking amber (print job or mopy in progress) N/A Stapler bin is full; 3,000 sheets have been collected in the stapler bin.
-Or- More than 1,500 sheets of 11-by-17 inch or A3-sized paper have been collected in the stapler bin. Remove paper from the stapler bin. Stapler low on staples N/A N/A N/A Only 20 to 50 staples remain. Refill the stapler. Check stapler device Clear jammed staple N/A Blinking amber Blinking yellow (one blink) A staple is jammed in the stapler. Clear the jammed staple. Stapler out of staples N/A N/A N/A The cartridge is out of staples. Refill the stapler. Too many pages in job to staple N/A N/A N/A The maximum height of stack to be stapled has been exceeded. Print job is completed, but not stapled.
Do not configure the equipment to staple stacks that are thicker than the maximum height allowed; follow the guidelines listed in the user’s guide.