9. Close the OmniBook, turn it over, and re-insert the five screws removed in step 3. Do not over-tighten the screws —screw just until you feel resistance. 10. Insert the battery. Connect the ac adapter. 11. Press the reset button. 12. Install Windows and the original software on the new drive C using the Recovery CD-ROM —check the README file for instructions. (If you are using an operating system other than Windows95, you need to re-install the operating system from your own source, then load the OmniBook- specific software, as explained in the Getting Started manual.) 13. Restore the files you backed up from the old drive C:
Click Start, Programs, Accessories, System Tools, Backup, and then use the Restore tab to specify the source of the backup files and the destination for the restoration. 56