Installation Installing the flue ducts RISK OF INJURY The insides of the flue ducts may have sharp edges. We recommend wearing protective gloves during installation. 1. Separate the flue ducts. To do this, remove the adhesive tape. 2. Remove the protective film from both flue ducts. 3. Insert one flue duct into the other. 4. Place flue ducts on the extractor hood, push the inner flue duct upwards and attach the left and right sides to the fixing bracket. NOTE: Avoid scratching the flue ducts when inserting them, e.g. by placing the installation template as protection over the edge of the outer flue duct. Note the position of the slots in the flue duct! – Exhaust-air mode:
Slots of the inner flue duct downwards. – Circulating-air mode: Slots of the inner flue duct upwards. 5. Screw the inner flue duct with 2 screws to the sides of the fixing bracket. 17