Operation Fan On/Off Intensive setting Grease filter saturation display Fan settings Fan run-on Light The appliance is operated by gently the tapping the sensor buttons. Light NOTE: It is recommended to switch on the blower when you start cooking and not to switch it off again until several minutes after you have finished cooking. In this way the kitchen fumes are removed most effectively. The light can be switched on and off independently of the fan. To adjust the luminosity, hold down the 0 button until the required luminosity is obtained.
Saturation displays Switching on the fan and selecting the fan settings When the grease filters are saturated, a signal sounds for 6 seconds after the fan is switched off. The J display is lit. The grease filters should be cleaned now. Press the W button. The fan switches to setting 2. To cancel the display, press the J button. Press the appropriate button to select the required fan settings. Switching the acoustic signal off and on When a button is pressed, an acknowledgement signal sounds. Switching off the fan Press the W button. To switch off the acoustic signal, simultaneously press the 0 and p buttons for approx. 3 seconds. An acknowledgement signal sounds.
Intensive setting The Intensive setting generates maximum performance. It can be used if thick fumes or strong odours occur temporarily. To switch on the acoustic signal, repeat the process. Press the q button. Locking the buttons If the Intensive setting is not switched off by hand, the fan automatically switches back to setting 2 after 10 minutes. To lock the buttons, simultaneously press 0 and q . The buttons are locked for approx. 30 seconds. Fan run-on Press the p button. To release the buttons early, repeat the process. The fan runs for 10 minutes at the selected setting. Then the fan switches off automatically. 9