Operation Fan On/Off Intensive setting Grease filter saturation display Fan settings Fan run-on Light Light Indirect lighting RISK OF INJURY Halogen bulbs become very hot when switched on. Even some time after the appliance has been switched off, there is still a risk of burns! Caution when pressing the switch for the indirect lighting. Do not touch the hot halogen bulbs! The light can be switched on and off independently of the fan. To adjust the luminosity, hold down the 0 button until the required luminosity is obtained. Switching the acoustic signal off and on When a button is pressed, an acknowledgement signal sounds.
To switch off the acoustic signal, simultaneously press the 0 and p buttons for approx. 3 seconds. An acknowledgement signal sounds. To switch on the acoustic signal, repeat the process. Locking the buttons To lock the buttons, simultaneously press 0 and q . The buttons are locked for approx. 30 seconds. 0 1 To release the buttons early, repeat the process. 2 1 The indirect lighting is on permanently. 0 Off 2 The indirect lighting is switched on and off together with the hotplate lighting. 10