Preface Preface About This Manual This manual is written for professional system integrators and PC technicians. It provides information for the installation and use of the A+ Server 4020A-8R. Instal- lation and maintainance should be performed by experienced technicians only. The 4020A-8R is a high-end 2U rackmount server based on the SC743S1-R760 4U/rackmount server chassis and the H8DA8 serverboard, which supports single or dual AMD Opteron 200 series processors and up to 32 GB of ECC registered DDR266 or 16 GB of ECC registered DDR400/333 SDRAM memory. Manual Organization Chapter 1:
Introduction The fi rst chapter provides a checklist of the main components included with the server system and describes the main features of the H8DA8 serverboard and the SC743S1-R760 chassis, which make up the 4020A-8R. Chapter 2: Server Installation This chapter describes the steps necessary to install the 4020A-8R into a rack and check out the server confi guration prior to powering up the system. If your server was ordered without processor and memory components, this chapter will refer you to the appropriate sections of the manual for their installation. Chapter 3:
System Interface Refer here for details on the system interface, which includes the functions and information provided by the control panel on the chassis as well as other LEDs located throughout the system. iii