DeviceNet Slave Communication Module IFD9502 the current I/O data mapping in the PLC. „ Class 0x97 Data Config Instance0: Instance1: 3.3 When IFD9502 is connected to Delta DTA temperature controller DeviceNet 1.
Baud rate and the setting of communication format Before connecting Delta temperature controller to bus, set the node address of the temperature controller as 01 and the communication format as 38,400 bps; 7, E, 1; ASCII (the format is fixed; other formats will be DVP-PLC Application Manual 13 Attribute ID Access rule Name Data type 1 Get Revision UINT Attribute ID Access rule Name Data type Default 1 Get/Set Reset parameter USINT H’0000 2 Get/Set M dlen in _ _ UINT A bits 3 Get/Set D dlen in _ _ UINT 6words 4 Get/Set M dlen out _ _ UINT A bits 5 Get/Set D dlen out _ _ UINT 6words 6 Get/Set M in start adr _ _ _ UINT H’0100 7 Get/Set D in start adr _ _ _ UINT H’0198 8 Get/Set M out start adr _ _ _ UINT H’0200 9 Get/Set D out start adr _ _ _ UINT H’01F4 10 Get/Set Comm Timeout UINT H’0020 DVPDNET DVPDNET-SL DVP28SV DVP28SV RUN STOP Master DVPDNET DVP28SV RUN STOP