DeviceNet Slave Communication Module IFD9502 below. 2 3 4 5 6 „ Follow 2 ~ 6 and set the PLC Station to 1 and communication format to 115,200, 7, E, 1, ASCII. Click ”OK”. z When IFD9502 is connected to TP04/TP02, please set up the baud rate and format following the procedure listed below. „ Open TPEditor and select “File>>New”. You will see the dialog box as below. 1 „ Follow 1 and set the Device Type to “Delta PLC”. Click ”OK” to create a new file. „ Select “Tools>>TP Object Communication Default Setting” and you will see the dialog box as below. DVP-PLC Application Manual 20