DC power supply modules Mechanical installation Important notes 6 6.5 6.5.1 6.5 Mechanical installation 6.5.1 Important notes Note! The devices must be installed in housings (e.g. control cabinets) to meet applicable regulations. 6.5.2 Devices in the range 10 ... 36 A (4 ... 18 kW) Mounting grid We recommend to provide the mounting plate with a grid pattern of M5 threaded holes for attaching the devices. This preparation enables easy attachment of the devices and the device sizes 1, 2, ... n can thus be mounted directly adjacent to each other.
SSP94PN010 Mounting with backplane for attaching the power supply module Grid hole pattern for installation backplane Grid hole pattern for other device sizes or built-on/footprint filters (only Single Drive) Cable duct 1 ... 3 Device size, mounting holes used 6.5-1 EDS94SPP101 EN 3.1-04/2007