A90 series Inverter User Guide 61 F12.41 UP/DOWN cross zero option 0：forbidden 1：allowed 0 〇 F12.45 Keypad UP / DOWN function selection 0：forbidden 1：allowed 1 〇 F13 Torque Control Parameter Group F13.00 Speed/Torque Control 0: Speed Control 1: Torque Control 0 〇 F13.01 Torque Reference selection 0: Digital Torque Setting F13.02 1: AI1 2: AI2 3-5:Not Used 6: Communication Percentage Setting (Full ranges of options 1 to 2, correspond to Digital torque setting F13.02) 7:
Not Used 0 〇 F13.02 Digital Torque Setting -200.0 - 200.0 (100.0= Motor Rated Torque) % 100.0 ● F13.03 Preset Torque 1 -200.0 - 200.0 % 0.0 ● F13.04 Preset Torque 2 -200.0 - 200.0 % 0.0 ● F13.05 Preset Torque 3 -200.0 - 200.0 % 0.0 ● F13.06 Torque Control Acceleration/Deceleration Time 0.00 - 120.00 s 0.05 ● F13.08 Upper Limit Frequency of Torque Control 0: Set through F13.09 1: AI1 2: AI2 3-5:Not Used 6: Communication Percentage Setting 7:
Direct Communication Setting 0 〇 F13.09 Upper Limit Frequency of Torque Control 0.00 - Maximum Frequency F00.16 Hz 50.00 ● F13.10 Upper Limit Frequency Offset 0.00 - Maximum Frequency F00.16 Hz 0.00 ● F13.18 Reverse speed limit 0～100 % 100 ● F13.19 Reverse torque limit 0～1 1 ● F14 Motor 2 Parameter Group This group of parameters users generally do not need to adjust, please refer to A90 user guide or visit www.sineedrive.com download function table electronic version.
F15 Auxiliary Function F15.00 JOG Frequency 0.00 - Maximum Frequency F00.16 Hz 5.00 ● F15.01 JOG Acceleration Time 0.00～650.00（F15.13=0） 0.0～6500.0（F15.13=1） 0～65000（F15.13=2） s 5.00 ● F15.02 JOG Deceleration Time s 5.00 ● F15.03 Acceleration Time 2 s 15.00 ● F15.04 Deceleration Time 2 s 15.00 ● F15.05 Acceleration Time 3 s 15.00 ● F15.06 Deceleration Time 3 s 15.00 ● F15.07 Acceleration Time 4 s 15.00 ● F15.08 Deceleration Time 4 s 15.00 ●