User Manual of A90 Series Inverter 7.13 Keyboard and Display Function Parameter Group of F12 Group function code F12.00. If F12.00=0, this key has no effect when pressed. For other settings, the corresponding effects will be obtained when this key is pressed. According to the setting of the function code F00.02 (command source option), the command sources are divided into the keyboard, terminal and communication. If the terminal is selected as the current command source, the Run RUN and Stop on the keyboard will be unavailable. In more dangerous cases, however, the fastest way is STOP RESET key to stop the inverter via the Stop key on the keyboard to resolve dangers.
It is the most convenient to use the keyboard to stop the inverter during normal operation. Therefore, the function code “F12.01: stop function options of the STOP key” is added. In addition, the STOP key is always valid by default. ★ It is recommended not to modify this parameter. If necessary, please set it carefully. 216 Function Function code Default Parameter description Unit Attribute code name setting F12.00 M.K multi-function key options 0: no function 1: forward jog 2: reverse jog 3: forward/reverse switching 4: quick stop 5: free stop 6:
cursor movement to the left 1 ○ M.K Function Function code Default Parameter description Unit Attribute code name setting F12.01 Options of stop function of STOP key 0: valid only in keyboard control 1: with all command channels valid 1 ○ STOP RESET Function Function code Default Parameter description Unit Attribute code name setting F12.02 Parameter locking 0: do not lock 1: reference input not locked 2: all locked, except for this 0 ●