User Manual of A90 Series Inverter 96 3: set torque 4: PID setting 5: output current F10.08 Proportional factor of slave reception 0.00-10.00 (multiple) 1.00 ● F10.09 Host sending interval 0.000-30.000 s 0.200 ● F10.56 Options of 485 EEPROM writing 0-10: default operation (for commissioning) 11: writing not triggered (available after commissioning) 0 ○ F11 User-selected parameter group F11.00 User-selected parameter 1 The displayed content is Uxx.xx, which means that the function code Fxx.xx is selected. When the function code F11.00 is enabled, the keyboard displays U00.00, indicating that the first selected parameter is F00.00.
U00.00 ● F11.01 User-selected parameter 2 U00.01 ● F11.02 User-selected parameter 3 U00.02 ● F11.03 User-selected parameter 4 U00.03 ● F11.04 User-selected parameter 5 U00.04 ● F11.05 User-selected parameter 6 U00.07 ● F11.06 User-selected parameter 7 U00.14 ● F11.07 User-selected parameter 8 U00.15 ● F11.08 User-selected parameter 9 U00.16 ● F11.09 User-selected parameter 10 U00.18 ● F11.10 User-selected parameter 11 U00.19 ● F11.11 User-selected parameter 12 U00.29 ● F11.12 User-selected parameter 13 U02.00 ● F11.13 User-selected parameter 14 U02.01 ● F11.14 User-selected parameter 15 U02.02 ● F11.15 User-selected parameter 16 U03.00 ●