MinimumRequiredFeatures MinimumRequiredFeatures VPARAMETER 560 Minimum percentage of required features that must be recognized in order to consider the object instance as valid. Syntax MicroV+ VPARAMETER (sequence_id, tool_id, 560, index_id, object_id) = value value = VPARAMETER (sequence_id, tool_id, 560, index_id, object_id) V+ VPARAMETER (sequence_id, tool_id, 560, index_id, object_id) $ip = value value = VPARAMETER ($ip, sequence_id, tool_id, 560, index_id, object_id) Type Double Range Minimum: 0.1 or greater. Maximum:
100.0 Remark(s) The minimum percentage of required features is expressed in terms of the number of required features in a model without considering the amount of contour each required feature represents in the model. For example, if the model contains 3 required features and MinimumRequiredFeatures is set to 50%, an instance of the object will be considered valid as long as 2 out of 3 required features are recognized. Parameters ACE Reference Guide, 18317-000 Rev A Page 383 $ip IP address of the vision server. Applies to V+ syntax only. Uses standard IP address format, for example: 192.168.1.120. sequence id _ Index of the vision sequence. The first sequence is 1.