ActiveCalibration ActiveCalibration VPARAMETER 5504 Reads and writes the index of the active calibration relative to a camera. Syntax MicroV+ VPARAMETER (sequence_id, tool_id, 5504, index_id, object_id) = value value = VPARAMETER (sequence_id, tool_id, 5504, index_id, object_id) V+ VPARAMETER (sequence_id, tool_id, 5504, index_id, object_id) $ip = value value = VPARAMETER ($ip, sequence_id, tool_id, 5504, index_id, object_id) Type Real variable. Range Minimum: 0 Maximum: The number of calibrations associated with the tool. Parameters ACE Reference Guide, 18317-000 Rev A Page 54 sequence id _ Index of the vision sequence. The first sequence is 1.
tool id _ Index of the tool in the vision sequence. The first tool is 1. ID 5504: the value used to reference this property. index id _ N/A object id _ N/A $ip IP address of the vision server. Applies to V+ syntax only. Uses standard IP address format, for example: 192.168.1.120.