Acquire Image Tool Properties Complete Example Here is an example showing a custom vision tool that will use a blob tool and a line finder to locate a square part. The vision tool will initially execute a blob tool to coarsely locate all parts in the vision window. Once the blob tool executes, the script will iterate through all the results and will position a line finder tool and execute the tool at 0, 90, 180, and 270 degrees offset from the blob center. It will use the line returned from the line finder to calculate the 4 corners and, ultimately, the center of the square. The center point will be returned as the result for the tool. ACE Reference Guide, 18317-000 Rev A Page 634