ArcMustBeTotallyEnclosed ArcMustBeTotallyEnclosed VPARAMETER 5141 When set to True, the start and end points of the arc must be located on the radial bounding sides of the Search Area. When set to False, the found arc can enter and/or exit the Search Area at the inner or outer annular bounds of the Search Area.
Syntax Micro V+ VPARAMETER (sequence_id, tool_id, 5141, index_id, object_id) = value value = VPARAMETER (sequence_id, tool_id, 5141, index_id, object_id) V+ VPARAMETER (sequence_id, tool_id, 5141, index_id, object_id) $ip = value value = VPARAMETER ($ip, sequence_id, tool_id, 5141, index_id, object_id) Type Boolean Range Parameters ACE Reference Guide, 18317-000 Rev A Page 73 Value Description 1 Start and end points of the arc must be located on the sides of the bounding area. 0 Start and end points of the arc can be anywhere inside or outside of the bounding area. $ip IP address of the vision server. Applies to V+ syntax only. Uses standard IP address format, for example: 192.168.1.120.
sequence id _ Index of the vision sequence. The first sequence is 1.