BilinearInterpolationEnabled Range Parameters ACE Reference Guide, 18317-000 Rev A Page 94 Value Description 1 Bilinear interpolation is enabled. Recommended default setting. 0 Bilinear interpolation is disabled. $ip IP address of the vision server. Applies to V+ syntax only. Uses standard IP address format, for example: 192.168.1.120. sequence id _ Index of the vision sequence. The first sequence is 1. tool id _ Index of the tool in the vision sequence. The first tool is 1. ID 120: the value used to reference this property. index id _ N/A object id _ N/A