T HE DISPLAY The display is the link between you and the security system. The text messages displayed show where and when faults or alarms have occurred. The display can also show a list of operations from which you can select. Examples of the messages which can appear include: TUE 23 APR 07.40 The date and time are always displayed, regardless if the system is armed or not. You can ask the installer to replace it with another message, if you want. Arm Menu If you press Accept ( ! ), you enter an option list. This option list can be used to determine the method used arm the system. Area 1 Arming The system is being armed. Leave the secured area now.
Not all the messages may appear on your display: it depends how the system has been programmed. It can show you only the messages you want to see, or those you are authorised to see. T HE LED S Area 1 Armed The system is armed. There are three coloured LEDs (light emiting diodes) on the keypad that let you quickly see if there is a problem. Green LED Power The mains power is on. If it has not been illuminated for a hour and a power cut is not apparent, contact your installer. Yellow LED Trouble If the yellow LED is on, there is a problem in the panel. The type of problem is shown in the display. Contact your installer. Problems that may occur include:
♦ Battery fault ♦ Fuse fault ♦ Line fault (if a dialler is connected) ♦ RKP fault (problem with keypads) EEPROM fault (problem in the system) Red LED Alarm The alarm is activated. The bells, keypad buzzers and flashing light may also be active. If a dialler is connected, the alarm is reported to the central station. When you enter your code, the system disarms, the bells and the flashing light are switched off, and the central station receives the report that the alarm has been deactivated. The red LED will also illuminate if you disturb an alarm zone during the exit period, and the bells and dialler will be activated. Page 6 User Manual for CD72/95/15003