6. Press the number of the open zone, in this example ‘2.’ 2 Inhibit Zone 2 The system then confirms which zone you have excluded. 002 Hall If another zone is open, it will be listed and you must again press " and the zone number to inhibit it. Is Inhibited The alarm is being set. System Arming The buzzer begins to beep. You must now exit the protected area by the designated exit route. Leave now Beeeep The alarm is now set. System Armed The current date and time will automatically appear. TUE 23 APR 08.22 D ISARMING A SYSTEM If you enter the premises when the system is armed, the buzzer will begin to beep (if programmed) with an intermittent tone to indicate that the entry period has begun.
As long as this beeping continues, you can disarm (switch off) the system with your code without activating an alarm. You must not enter other areas of the system during the beeping. If you do, a siren will sound and a full alarm condition may occur. The entry period (length of time of the beeping) is programmed by the installer. 1. Go to the keypad. The entry period starts as soon as you open the entrance door, or when you enter the entry zone. You can switch off the system without activating the alarm as long as the beeping continues. Beep Beep The current day, date and time are displayed. An example is shown. TUE 23 APR 07.39 2. Press the key 0 and then enter your code.
A ‘*’ appears in the display for every key you press. Use the 0 key to cancel an incorrect entry and to restart a new entry code. Enter Code 0 + code Enter Code **** Disarm? 3. Press the Accept key. ! Finished? 4. Press the Accept key to confirm that you have finished. Steps 3 and 4 may be automated by the system. If so, you will not have to press the Accept key. ! TUE 23 APR 07.40 User Manual for CD72/95/15003 Page 9