Chapter 7 Motion Control Programming Function buttons for E-CAM chart: The operation and setting steps by using the function buttons are explained as below. You can click ( Insert a point) and move the cursor to the position where you want to create a data point. Click at the position to create the data point, and the position/velocity/acceleration data of the data point will also be inserted in the Data setting area as below.
7_ 7-33 Icon Name Description Insert a point Inserting an data point to the position curve in the E-CAM curve area Insert a section Inserting a section with two end points into the position curve in the E-CAM curve area E-CAM setting Opening the E-CAM setting window Export Exporting the E-CAM data in .txt format and speicifying the directory for saving this file. Import Importing the E-CAM file from the specified directory Insert a row Inserting a row under the selected row in the Data setting area Delete a row Deleting a selected row in the Data setting area.