Chapter 7 Motion Control Programming eCamCurve Example 7_ The parameters of creating a rotary cut curve by means of the motion control function block DFB_CamCurve2 are described below. Distance for which the master axis specified moves=1000 Distance for which the slave axis specified moves=500 Distance for which the slave axis specified is synchronized with the master axis specified=300 Synchronization ratio of the speed of the slave axis specified to the speed of the master axis specified=1.0 The rotary cut curve created and the values of parameters are shown below. 7-47 0: leftCAM 1: midCAMall 2: midCAMbegin 3: midCAMend 5: right CAM 7: midCAMbegin 8: midCAMend 9: Empty